Sound Card Packet

Introduction
    AGWPE Overview
    More about AGWPE
1. Interface
    Getting Started
    Kits and Pre-assembled
    Receive Audio Cable
    Transmit Audio Cable
    PTT (TX Control) Cable
    2 Radio Modification
2. AGWPE Set Up
    Download and Install
    Basic AGWPE Setup
    2 Radio Setup
    2 Card Setup
3. Sound Card Setup
    Basic Settings
    Additional Settings
    Tuning Aid
4. Windows™ Setup
    TCP/IP Settings
    Update Windows
5. Problems?
    Program Behavior
    Receiving
    Transmitting
    Connections
6. Using AGWPE
    AGWPE on a Network
    Baud Rates & Modes
    Remote Control
    TCP/IP Over Radio
    Tips and Tricks
    Traffic Parameters
7. Compatible Programs:
    Setup Help
    UI-View
    WinAPRS
    Winpack
    Others
  
   

 

AGWPE-compatible Programs

The chart below shows some of the programs and utilities that will work with AGWPE. In addition, the AGWPE site has information about a few other programs. Click on the "AGWPE configuration help" next to a program for additional help on this web site. Otherwise, visit the program's web site listed in the last column.

If you're having trouble getting a particular application to work with AGWPE, first make sure AGWPE works with the  AGW Terminal Program . If AGWTerm won't work with AGWPE, then you have a problem with AGWPE that needs to be resolved before it will work with the other program; see the troubleshooting guide.

AGWPE-compatible Packet Program Categories:
AGWPE Interfaces
APRS
BBS / PMS
Digipeater
DX Cluster
Messaging
Nodes  (BPQ32, Xnet)
Satellite
Signal Path Predictions (Radio Mobile Deluxe)
Terminal Programs
TNC Emulation (MixW)
Winlink Utilities

Type Name Help configuring with AGWPE
AGWPE Interfaces AXIP link AGW Packet Engines and other applications together via TCP/IP
see  http://www.qsl.net/lu7did/   and
http://www.qsl.net/lu7did/bin/axipdrv/axipdrv.txt

See this page for Keith G1GXB's description of how to use AXIP to link to X-router

  KISS-Mode TNC Emulator interface WiSP, JNOS or other KISS-mode programs and MixW to AGWPE
see  http://www.pearsoncomputing.net
  TelMgr access AGWPE via a Telnet connection
see  http://www.qsl.net/lu7did/telmgr.htm
  XGlue  interface AGWPE to PC/Flexnet32 and thus to programs that work with Flexnet
see  http://www.qsl.net/lu7did/xglue.htm
     
APRS AGWTracker see   Info:   http://www.agwtracker.com/
  APRSPoint see  http://www.aprspoint.com
  APRSPlus AGWPE configuration help
  OziAPRS; netAPRS see  http://www.radio-active.net.au/web/gpsaprs/oziaprs.html
  UI-View32 AGWPE configuration help
  WinAPRS AGWPE configuration help
  XASTIR AGWPE configuration help
     
BBS / PMS AIZBBS 7.10 see  http://www.spiros.gr/download.htm
  HamServ 2.65
a multi mode BBS/PMS		 see  http://www.gb7abc.net/hamserv.html
  FBB (Windows version) AGWPE configuration help
     
Digipeater AGWUIDigi download  from the AGW Programs page on this site.
  Digi_NED see: http://www.qsl.net/digi_ned/
  Digiplex see  http://www.qsl.net/lu7did/digiplex.htm
     
DX Cluster AGWCluster see  Info at http://www.sv2agw.com/ham/dxcluster.htm
Download: http://www.sv2agw.com/downloads/default.htm
  RXClus see http://www.hb9bza.net/rxclus/index.html
  IZ4AFW AGW Packet Engine Telnet Interface - DX Cluster support for  Logger program see  http://www.qsl.net/iz4afw/english/sub-index.html
  UI-DX Bridge -Receive or relay internet DXCluster info on APRS see  http://www.apritch.myby.co.uk/uidx.htm
     
Messaging UI-Instant Messenger http://www.apritch.myby.co.uk/addon_agw.htm#uim
     
Nodes BPQ32 - AX.25 NETROM-compatible node software for Windows BPQ32 implements an interface to AGWPE via the BQPtoAGW.dll file included with the latest BPQ32 download.

Download 27July 2008 Software Release

Installation info: http://dxspots.com/BPQ32/410e_2008Jul27/BPQ32_Installation.htm

See: http://groups.yahoo.com/group/BPQ32/ for possibly newer versions

 
  (X)Net see http://www.swiss-artg.ch/xnet/
     
Satellite PCSAT Telemetry Decoder see  http://www.ui-view.com/
  UISS - sends UI / APRS packets to satellite digipeaters see  http://users.belgacom.net/hamradio/uiss.htm
     
Signal Path Predictions (VHF/UHF) Radio Mobile Deluxe - plots APRS stations on topographical map AGWPE configuration help
     
Terminal Programs AGWMonitor(Receive only) AGWPE configuration help
  AGWTerm
(Receive & transmit)		 AGWPE configuration help
  HamScope AGWPE configuration help
     
  NBF see  http://www.hut.fi/~jtuomi/nbf_index.html
  TSTH AGWPE configuration help
  WinPack AGWPE configuration help
  WinSTOP see  http://www.winstop.de/en/winstopinfo.html
  WinTNC see  http://www.g7jjf.com/ 
     
TNC Emulation MixW - also has a sound card modem that AGWPE can access; good HF packet modem AGWPE configuration help
     
Winlink Utilities Paclink MP- Utility to send e-mails to RMS stations using packet and AGWPE. The original version of PacLink (and Paclink Post Office) is no longer available.

Paclink MP is currently in beta release and can be obtained by joining the Paclink MP e-mail group at http://groups.yahoo.com/group/PaclinkMP. The current version of the program (with documentation) is in the files section of the Group. Requires Microsoft .NET Framework 2.0
  Airmail to AGWPE Linker AGWPE with Airmail
  RMS (Radio Mail Server) Packet   see  http://www.winlink.org/software - for gateway stations that have an internet connection; you will need to apply for a key code. Gateways accept packet connections from PacLink MP or Airmail clients.
  Last Updated: 08/11/2008